Day 27 Back to Exams Page 1. Network convergence occurs when all routers in the network have the same view and agree on optimal routes.TrueFalseQuestion 1 of 16 2. Packet forwarding involves which two processes?Installing the route in the routing tableDetermining the best pathSending the packet (switching)Advertising the route to a neighborQuestion 2 of 16 3. In Cisco IOS software, all sources of routing information are assigned a default administrative distance value. This default value is an integer between __ and ___.1 and 2550 and 2540 and 2551 and 254Question 3 of 16 4. Unreachable or Unknown Routes are given with administrative distance?12542550Question 4 of 16 5. In Cisco IOS software, the ____ interface configuration command can be used to adjust the default bandwidth value for an interface.bandwidthdelayspeedset speedQuestion 5 of 16 6. Passive interfaces are usually not able to receive routing updates or Hello packets but are allowed to send any kind of routing protocol information outbound.TrueFalseQuestion 6 of 16 7. In order for the SPF algorithm to work in the correct manner, all routers in the area should have the same database information.TrueFalseQuestion 7 of 16 8. All Distance Vector routing protocols share the following characteristics:Counting to infinitySplit horizonPoison reverseHold-down timersQuestion 8 of 16 9. _______ mandates that routing information cannot be sent back out of the same interface through which it was received.No returnReverse courseCount to infinitySplit horizonQuestion 9 of 16 10. During the hold-down period, the router suppresses the network and prevents advertising false information.TrueFalseQuestion 10 of 16 11. Tick the classless routing protocols.RIPRIPv2IGRPISISOSPFQuestion 11 of 16 12. This feature prevents routers from sending packets through a route that has become invalid. Distance Vector protocols use this to indicate that a route is no longer reachable. This is accomplished by setting the route metric to a maximum value.Split horizonRoute poisoningCount to infinityLimit hopQuestion 12 of 16 13. With default routing, if a router receives a packet and it doesn’t have a destination route in its routing table, it can forward the packet to the default route.TrueFalseQuestion 13 of 16 14. In order to understand default routing, you must remember that routers will forward traffic to the most specific route. So, a router will forward a packet to _______ before it will send a packet to _______.192.168.1.0/24 - 192.168.0.0/16192.168.0.0/16 - 192.168.1.0/24Question 14 of 16 15. Which command will set a passive interface for RIP?R1(config)#passive-interface loopback0R1(config-router)#passive-interface loopback0R1(config-if)#passive-interfaceR1(config-router)#passive loopback0Question 15 of 16 16. If you have a discontiguous RIP network, you will need to ensure that you have ______ configured on EVERY router.no autoauto-summaryno auto-summaryno summaryQuestion 16 of 16 Loading...